|
The VigorSwitch G1241 is a 24-port Gigabit Ethernet Web Smart switch with high-performance capability and IPv6 management. It is equipped
with extensive facilities for maximizing your LAN performance and also
enhancing security such as VLAN groups (port or tag based), QoS
prioritization and bandwidth/traffic control. The VigorSwitch G1241 is
designed with CLI interface for flexibility. It is compliant with IEEE
802.1d Spanning Tree and it supports Loop detection for maintenance. In
compliance with IEEE802.3az EEE for low power consumption, you can set
up a green Ethernet networking environment. Through VigorSwitch G1241,
your business network will be able to obtain high performance and
advanced networking quality to deliver all networking communications and
data over a single network. With an intuitive and web-based user
interface, your network administrator can simplify deployment, and apply
Port Security and Quality of Service (QoS) traffic prioritization to
your business network.
QoS (Quality of Service)
With DrayTek VigorSwitch G1241, the QoS feature provides eight
internal queues to support eight different classifications of traffic.
High priority packet streams experience less delay inside the switch,
which supports lower latency for certain delay-sensitive traffic. The
switch classifies the packet as one of the eight priorities according to
802.1p priority tag,
DiffServ and/or DSCP based. The QoS operates at
full wire speed.
Port Mirroring
Port Mirroring mechanism helps track network errors or abnormal
packet transmission without interrupting the flow of data, allowing
ingress traffic (RX mode) to be monitored by a single port that is
defined as mirror capture port. Up to N-1 (N is Switch’s Ports) can be
mirrored to single destination port. A single session is supported.
Bandwidth Aggregation
The Gigabit ports can be combined together to create a multi-link
load-sharing trunk. Up to 8 Gigabit ports can be set up per group. The
switch supports up to 8 trunking groups.
Port trunks are useful for
switch-to-switch cascading, providing very high full-duplex speeds.
Efficient ManagementM
The Web User Interface of VigorSwitch provides you with
configuration, system dashboard, maintenance, and monitoring. The Dual
Image gives you independent primary and secondary OS files for backup
while upgrading. With SNMP version 2c, your network administrator can
remotely configure VigorSwitch G1241 and other DrayTek Switches in the
network. The VigorSwitch G1241 has hardware button to reboot device and
reset to default for recovery and maintenance.
Energy efficiency
The VigorSwitch G1241 is fully compliant with IEEE802.3az which is an
energy efficient Ethernet protocol. The Power saving using Power
Management techniques to detect the client idle and cable length
automatically and provides the different power. The latest
application-specific integrated circuits (ASICs), using lower-power
technology, allow for lower power consumption and thinner, more
efficient designs.
|
:
